Description
Detail fabrication drawings for a compact access stair with the shortest going allowed by AS1657.
- Bolted construction utilising PFC stringers, industry standard stair treads and industry standard stanchions.
- For installation there is a 30mm grout allowance at ground level.
- An example of what is included can be seen in the preview images.
Stair details:
- I/S Width: 600mm
- Stringers: 150PFC
- Treads: T6 Bolted, Abrasive Nosing
- Stanchions: AM
The following heights are currently available:
- 1500mm
- 2000mm
- 2500mm
- 3000mm
- 3500mm
- If you have a height requirement that is not listed, please contact us so we can assist you.
Disclaimer: These stairs are set out in accordance with AS1657-2013 Fixed Platforms Walkways Stairways and Ladders.
These stairs have not been certified by a structural engineer. All mounting surfaces must be checked & approved by a suitably qualified engineer before installation of the stairs.
For assistance with certification, please contact Quadro Design.
If you are unsure of these instructions, please contact Quadro Design for assistance.
